Electronic Flow Meter

Approx. Rs 12,500 / PieceGet Latest Price

• Bursting Pressure 100 Bar
• Lcd Display
• Flow-rate Indication
• Easy To Calibrate
• K24-a Version Compatible With Any Biodiesel

• K24

  PIUSI K24-A is a digital flow meter with turbine suitable for diesel monitoring and digital management of the fluid dispensed.

  PRECISION AND QUALITY

  The K24-A digital diesel flow meter has been designed to monitor the flow of low-viscosity fluids. Easy to install, in-line or at the end of the dispensing pipe, K24-A has a display that can be applied in various positions to facilitate reading. The sturdy housing and sealed internal electronic board make it suitable for use in virtually any working condition.

  RELIABILITY

  K24-A has an aluminum body and a polypropylene turbine. The pulse type is single-channel, reed switch. The electronic board with LCD shows a partial of 5 digits from 0.1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 l/min.

  The K24-A diesel flow meter guarantees a metering accuracy of +/- 1%; if the metering turns out inaccurate, K24-A can always be calibrated to ensure maximum precision in its operation. With a pressure drop of < 0.03 bar at 120 l/min and a repeatability of 0.2 %, the K24 flow meter is powered by two AAA batteries. Thanks to its rotating display, K24-A can be adapted to any application and working condition.

  K24-A COMPATIBLE WITH ANY BIODIESEL

  Thanks to its structural features, PIUSI K24-A is suitable for ANY BIODIESEL and can be safely used to measure biodiesel of any blending and origin.

Approx. Rs 25,000 / PieceGet Latest Price

• Features
• Adjustable Flanges
• Easy-to-read Big Display
• Rotating Display
• Standard Battery
• Pulse-out Version Available
• Ip66

• PIUSI K600 B/3 for Fuel

  PIUSI K600 B/3 is an electronic diesel flow meter suitable for monitoring the quantity of diesel or lubricating oil dispensed. For non-commercial use, the uniqueness of K600 B/3 is to have a larger, easy to read display sized 80 mm, with a partial total of 5 digits (h=24 mm) with floating point from 0.001 to 999.99 Total, not resettable to 8 digits (h=5 mm) from 1 to 99999999.

   

  MADE IN PIUSI

  The K600 B/3 flow meter consists of oval gears in acetal resin for precise monitoring of the dispensed quantity of diesel. The structure of the flow meter is solid and robust with an aluminium measuring chamber and the integrated suction filter safeguards the integrity of the flow meters. It guarantees a safe dispensing without impurities, which may result in unpleasant blocks while dispensing.

   

  HIGH PRECISION

  The K600 B/3 flow meter for diesel ensures a monitoring accuracy of +/- 0.5% for a maximum flow rate of 100 l/min. These features complete the K600/3 flow meter:

  • Repeatability 0.2%
  • Pressure drop < 0.5 bar at the max. flow rate.
  • IP66 protection against dust and water.

   

  K600 B/3

  The pulse out version is also available on request. It is divided into two types of flow meters, which differ according to the type of installation. The K600 B/3 flow meter has a display and can be installed in the fluid transfer system, while K600 B/3 Pulse-OUT has no display and can be connected via a 10-metre connection wire to the remote flow meter. Its application is recommended in case you want to monitor the quantity dispensed not directly on the system, but from the office.